Table of Contents
Advertisement
1. MOUNTING
Mounting procedure
1. Drill four pilot holes in the mounting location for mounting screws (φ5×20, local
supply), referring to the outline drawing at the back of this manual.
2. Screw the four self-tapping screws into the pilot holes. Leave 5 mm of thread vis-
ible.
3. Hang the unit onto the screws fastened at step 2.
4. Fasten all screws tightly to secure the unit in place.
Self-tapping
screw
(ø5×20, 4 pcs)
1-12
Detailed view
Hang on the unit onto the
self-tapping screws.
Advertisement
Table of Contents
