Table of Contents
Advertisement
3. INITIAL SETTINGS
• [On]: The echo picture for this equipment is
displayed on main monitor and the echo pic-
ture for external sounder is displayed on sub
monitor. To display the echo picture on the
sub monitor, select the [Display] icon (
from the InstantAccess bar followed by se-
lecting the [External Echo Sounder] icon
(
). The message shown to the above-right appears, select the [OK] button to
reset the system.
Note 1: This menu is available when [Dual] is selected at [Sub Monitor Display Switch-
ing].
Note 2: The display resolution setting is required when the monitor type is changed.
3.2.3
Date and time setting
Set the date and time on the [Shared Settings] menu.
Item
[Date Auto
Adjust]
[Date Setting]
[Time Setting]
3-4
Setting value
[Off],
Select [On] to automatically adjust the date and time
[On] (default)
at system start-up. Select [Off] to manually adjust the
date and time as required.
YYYY/MM/DD
Enter the appropriate date manually in the box below.
Note: This menu is available when [Off] is selected at
[Date Auto Adjust].
hh/mm/ss
Enter the appropriate time manually in the box below.
Note: This menu is available when [Off] is selected at
[Date Auto Adjust].
)
Meaning
Advertisement
Table of Contents
