Table of Contents
Advertisement
1. MOUNTING
1.1.1
Deck mount
1. Drill four pilot holes in the mounting location for mounting bolts (M6 bolts or coach
screws φ6), referring to the outline drawing at the back of this manual.
2. Secure the unit using the four hex head slot bolts (M6×20, supplied).
1.1.2
Bulkhead mount
1. Drill four pilot holes in the mounting location for mounting bolts (M6×20, supplied),
referring to the outline drawing at the back of this manual.
2. Screw two hex head slot bolts into the lower pilot holes. Leave 5 mm of thread vis-
ible.
3. Set the notches of the unit onto the screws fastened at step 2.
4. Screw two hex head slot bolts into the upper fixing holes.
5. Fasten all screws tightly to secure the unit in place.
Hex head slot bolt
(M6×20, 4 pcs
1-2
Hex head slot bolt
(M6×20, 4 pcs
Detailed view
Set the notches of the unit
to the bolts.
Advertisement
Table of Contents
