Table of Contents
Advertisement
2. Wrap the two flank sponges around the sides of the transducer. Face the cut side
toward the transducer and insert the uncut part between the transducer and the
TD attachment.
3. Secure the sponge in place with a hose clamp (stainless band). Apply silicone
sealant (local supply) to the screws to prevent seizing and corrosion.
4. Refit the press plate as before. Tighten the double nuts at 63.5Nm torque.
5. To attach to the ship's bottom, refer to the T625 tank drawing.
Flank sponge
Insert the uncut
part between the
transducer and the
TD attachment.
TD attachment
Stainless band
Silicone sealent
1. MOUNTING
1-9
Advertisement
Table of Contents
