Led State Definitions; Switch Leds - Extreme Networks ExtremeSwitching Virtual Services Platform 8000 Series Installation Manual

Installing the Virtual Services Platform 8000 Series
show sys-info temperature
Example
Check the status of the fan modules.
VSP-8000:1>show sys-info fan
Fan Info :
Description OperStatus
-------------------------------------------------------
Tray 1 Fan 1
Tray 2 Fan 1
Tray 3 Fan 1
Tray 4 Fan 1
Check the internal temperature of the switch.
VSP-8000:1>show sys-info temperature
Temperature Info :
CPU Temperature
34

LED state definitions

The figures and tables in the following sections describe the LEDs on the VSP 8000 Series switch.
The tables describe LED operation for a switch that finishes the power-on self-test.
Warning:
Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look into
an optical fiber or connector port. Always assume that fiber-optic cables are connected to a light
source.

Switch LEDs

The following table describes the main switch LED state indications provided by LED color and
fluctuation cues.
Table 19: Switch LED state indicators
Label Color and Status
PWR Off
Green (steady)
Green (blinking)
Status Off
March 2020
OperSpeed
up mediumSpeed
up mediumSpeed
up mediumSpeed
up mediumSpeed
MAC Temperature PHY1 Temperature
39
Description
The switch is not receiving power and not operating.
The switch is receiving power from either one of the power
supplies (if two power supplies are installed).
The system is in reset.
The switch is non-operational.
Installing the VSP 8000 Series
AirflowDir
front-back
front-back
front-back
front-back
PHY2 Temperature
32 35
Table continues...
82