Ethernet Switch Module - Extreme Networks ExtremeSwitching Virtual Services Platform 8000 Series Installation Manual

Installing the Virtual Services Platform 8000 Series
Note:
• The front view is common for both VSP 8404 and VSP 8404C models.
• When looking at the front of the switch, slot numbering begins at the top row and increases
from left to right. Slot 1 is the top-left slot; slot 2 is the top-right slot. Slot 3 is the bottom-left
slot; slot 4 is the bottom-right slot.
Figure 3: VSP 8404 Front view
1. Displays the four slots to install ESMs. For more information on the supported ESMs and
their part numbers, see
page 14.
2. LEDs for system power (PWR), switch status (Status), redundant power supply (RPS), and
fan modules (Fan).
3. USB port
4. Console port
5. OOB management port

Ethernet Switch Module

An Ethernet Switch Module (ESM) is a field replaceable expansion module that provides physical
interfaces on the VSP 8400 Series. The VSP 8400 Series provides four expansion slots.
The VSP 8400 Series supports the following ESMs.
8424XS
• 8424XS — EC8404001-E6 – provides 24 1/10G SFP+ ports.
• 8424XS (GSA version) — EC8404001-E6GS – provides 24 1/10G SFP+ ports.
Dimension
March 2020
Table 5: VSP 8400 Series Ethernet switch modules (ESMs)
4.4cm – 1RU (H), 20.32cm (W), 29.21cm (D)
Installing the VSP 8000 Series
on
Table continues...
22