Extreme Networks ExtremeSwitching Virtual Services Platform 8000 Series Installation Manual page 21

7. Management port — The LEDs are on the bottom of the port. For more information, see
LEDs on page 83.
8. LEDs for system power (PWR), switch status (Status), redundant power supply (RPS), and fan modules
(Fan). For more information, see
The following figure shows the rear of the chassis with four fan modules and one power supply
installed. The fan modules are numbered 1–4 from left to right, and the power supplies are
numbered PSU 1 on top and PSU 2 on the bottom.
Figure 2: VSP 8284XSQ — Rear view
VSP 8400 Series
The VSP 8400 Series consists of:
• four slots to install ESMs. For more information, see
page 22
• one 10/100/1000BASE-T Out-of-Band Management port
• one RJ45 console port
• one USB 2.0 port
• one field replaceable 800 watt power supply (AC or DC)
• four field replaceable 12 volt fan modules
• Base Software License
The following figure shows the front view of the VSP 8404.
March 2020
Switch LEDs on page 82.
Installing the VSP 8000 Series
Installation fundamentals
Ethernet Switch Module (ESM).
Management port
on
21