Hard Drive Led Indicator Patterns; Back Panel Features - Extreme Networks Purview PV-A-300 Installation Manual

Hard Drive LED Indicator Patterns

The hard drive has two LED indicators visible from the front of the system — one is a green
LED for disk activity, and the other is amber and indicates hard drive status. The LEDs have
the following states, as described in
Table 3: Hard Drive Activity LED Indicator Patterns
Hard Drive Condition
Power on and drive spinning up or spinning down
Power on with drive activity
Table 4: Hard Drive Status LED Indicator Patterns
Hard Drive Condition
No access or no fault
Hard drive fault has occurred

Back Panel Features

Figure 5 shows the PV-A-300 appliance back panel.
Table 5: PV-A-300 Back Panel
A Power Supply Module #1
B Power Supply Module #2
eth0, Mgmt Port, 1 GbE RJ45
C
D eth1
E eth2
eth3
F
Table 6 describes the LEDs for the RJ45 management port.
Purview PV-A-300 Appliance Installation Guide
Hard Drive LED Indicator Patterns
Table 3 and Table 4.
G Video Connector
H Not used
USB 2.0 Ports
I
J Not used
K Not used (Used if PV-A-300-10G-UG is
installed)
Not used
L
Activity LED Patterns
Off
Blinking green
Status LED Patterns
Off
Solid amber
8