Extreme Networks ExtremeSwitching Virtual Services Platform 8000 Series Installation Manual page 37

Figure 13: Shipping components
Rails
The following figure shows a slide rail in the default configuration for a 300mm-600mm equipment
rack. This configuration comes with the short rear bracket installed. The slide rail actually consists of
two separate rails that slide into each other:
• Rack rail—This rail is the main component that connects to the equipment rack.
• Chassis rail—This rail is embedded in the rack rail. Later, the installation instructions explain
how to detach these two rails and install the chassis rail onto your switch.
March 2020
Installing the VSP 8000 Series in an Equipment Rack
Installing the VSP 8000 Series 37