Extreme Networks ExtremeSwitching Virtual Services Platform 8000 Series Installation Manual page 36

Installing the Virtual Services Platform 8000 Series
This kit is a separately ordered item (Part # EC8011002).
For instructions see:
• Inventory of slide components
• Installing slides in a 300mm-600mm equipment rack
• Installing slides in a 600mm-900mm equipment rack
• Important notice about rack safety
• Removing the switch from an equipment rack
Warning:
If you pull the switch all the way out on the slide rails, there is a danger of the rack tipping over.
For more information and guidelines, see
Inventory of slide components
This section describes the slide components and their features.
The shipping carton contains the following components:
• Two 300mm-600mm slides (default configuration)
• Two extension brackets for the 600mm-900mm configuration
• Two long rear brackets for the 600mm-900mm configuration
• Bag of screws
March 2020
on page 36
on page 65
on page 66
Important notice about rack safety
Installing the VSP 8000 Series
on page 44
on page 52
on page 65.
36