Cable Requirements For The Vsp 8000 Series - Extreme Networks ExtremeSwitching Virtual Services Platform 8000 Series Installation Manual

4. Insert and tighten the rack-mount screws.
5. Verify that the switch is securely fastened to the rack.
6. Connect power and network connections to the switch.

Cable requirements for the VSP 8000 Series

The following table describes the cables required for a VSP 8000 Series switch.
Table 12: Switch cable requirements
Required Cable
10/100/1000BASE-TX Ports
Console Port (10101)
March 2020
Description
The interconnect cabling must conform to the Cat5e, Cat6, or Cat6e
specification of the Commercial Building Telecommunications Cabling
Standard, ANSI/TIA/EIA 568-B fitted with an RJ-45 Module jack.
Varies depending on the user device. The VSP 8000 Series switch
has an RJ-45 female connector so a serial cable with an RJ-45
Installing the VSP 8000 Series
Cable requirements for the VSP 8000 Series
Table continues...
69