Table of Contents
Advertisement
Grounding the SLX 9140 switch
NOTE
The terminal for the connection of a grounding conductor is not to be used with an aluminum conductor.
NOTE
To ensure adequate bonding when attaching the ground lug, a minimum of 20 in-lb (2.76 Nm) of torque is required to be applied
to the mounting hardware used to attach the ground lug.
56
ExtremeSwitching SLX 9140 Hardware Installation Guide
9036857-00 Rev AA
Advertisement
Table of Contents
Related Manuals for Extreme Networks ExtremeSwitching SLX 9140
Related Products for Extreme Networks ExtremeSwitching SLX 9140
- Extreme Networks ExtremeSwitching SLX 9540
- Extreme Networks ExtremeSwitching SLX 9030 Series
- Extreme Networks ExtremeSwitching SLX 9030-48S
- Extreme Networks ExtremeSwitching SLX 9030-48T
- Extreme Networks ExtremeSwitching SLX 9150
- Extreme Networks ExtremeSwitching SLX9150-48Y-8C
- Extreme Networks ExtremeSwitching SLX9150-48Y-8C-AC-F
- Extreme Networks ExtremeSwitching SLX9150-48Y-8C-AC-R
- Extreme Networks ExtremeSwitching SLX9150-48XT-6C
- Extreme Networks ExtremeSwitching SLX9150-48XT-6C-AC-F
- Extreme Networks ExtremeSwitching SLX9150-48XT-6C-AC-R
- Extreme Networks ExtremeSwitching SLX 9250
- Extreme Networks ExtremeSwitching SLX9250-32C
- Extreme Networks ExtremeSwitching SLX9250-32C-AC-F
- Extreme Networks ExtremeSwitching SLX9250-32C-AC-R
- Extreme Networks Summit4/FX