Time And Items Required; Parts List - Extreme Networks ExtremeSwitching SLX 9140 Hardware Installation Manual

Installing the Universal Four-Post Rack Kit (XBR-R000296)

Time and items required

Allow 15 to 30 minutes to complete the installation.
The following items are required to install the device using the Universal Four-Post Rack Kit:
•
#2 Phillips torque screwdriver
•
1/4-inch slotted-blade screwdriver

Parts list

The following parts are provided with the Universal Four-Post Rack Kit (XBR-R000296).
FIGURE 16 Rack kit parts
1 Front brackets (2)
2 Extension brackets, medium (2)
3 Rear brackets, short (2)
4 Rear brackets, long (2)
5 Extension brackets, long (2)
Ensure that the items listed and illustrated in
depending on the device type.
26
6 Screw, 8-32 x 5/16-in., panhead Phillips (8)
7 Screw, 8-32 x 5/16-in., flathead Phillips (16)
8 Screw, 6-32 x 1/4-in., panhead Phillips (8)
9 Screw, 10-32 x 5/8-in., panhead Phillips (8)
10 Retainer nut, 10-32 (8)
Figure 16 are included in the kit. Note that not all parts may be used with certain installations
ExtremeSwitching SLX 9140 Hardware Installation Guide
9036857-00 Rev AA