Table of Contents
Advertisement
Technical Publication
Section 12: Excess Cable Management
If length of cable installed needs to be adjusted you can split the cable at the BBU end using the process below and
then coiling the excess fiber subunits in a storage box. Patch Panel Kits are available to manage any excess fiber
length in the breakouts at the BBU.
1
Mark cutback length
3
Place Rip Cord in Notches'
5
Stop at Length Marker
www.commscope.com
2
Notch Armor using flush cutter in-line with
Kevlar strings
4
Pull Rip Cord Parallel to Cable
(while supporting breakout)
6
Separate Armor
Bulletin # 7843672
Rev. B
Scan to
view video
17
Advertisement
Table of Contents
