5520-Vim Port Leds In Default (Sys) Mode; 5520-Vim Port Leds In Spd Mode - Extreme Networks ExtremeSwitching 5520 Series Hardware Installation Manual

Monitoring the Device

5520-VIM Port LEDs in Default (SYS) Mode

In the default SYS mode, SPD is OFF, and the port status will display behavior for link, traffic, and PoE as
described in the following table:
Table 32: 5520-VIM Port LEDs in SYS Mode (default)
Color/State
Steady green
Blinking green
Slow blinking green
Off

5520-VIM Port LEDs in SPD Mode

SPD mode is used to help determine the operational speed of a port. Color and blink pattern indicate
speeds, as referenced by the following table:
Table 33: 5520-VIM Port LEDs in SPD Mode
Color/State
Slow blinking green
Solid green
Fast blinking green
Meaning
Link is OK; port is not powered
Link is OK and transmitting packets; port is not powered
Port is admin disabled
Port is not powered, has no link
ExtremeSwitching 5520 Series Hardware Installation Guide
5520-VIM Port LEDs in Default (SYS) Mode
Speed
10Gbps
1Gbps
25Gbps
127