Installing Your Switch - Extreme Networks ExtremeSwitching 5520 Series Hardware Installation Manual

Installing Your Switch

Safety Considerations for Installing Switches
What You Will Need for the Installation
Attaching the Switch to a Rack or Cabinet
Installing Optional Components
Installing Internal AC Power Supplies
Turn on the Switch
Connecting Network Interface Cables
Before you attempt to install or remove an Extreme Networks switch, read the precautions in
Considerations for Installing Switches
Extreme Networks switches fit into standard 19-inch equipment racks.
A four-post rack-mounting kit is provided with the switch. A two-post kit can be ordered separately.
The installation process includes the following tasks:
1. Prepare to install the switch.
See What You Will Need for the Installation
2. Install the switch in the rack.
See Attaching the Switch to a Rack or Cabinet
3. Install optional components: optical transceivers and cables.
See the instructions in
4. If your switch does not come with an installed internal power supply, install one or two power
supplies.
See Installing Internal AC Power Supplies
5. Power up the switch.
See Turn on the Switch
6. Connect network interface cables.
See Connecting Network Interface Cables
on page 80
on page 74.
Installing Optional Components
Note
Be aware of whether the power supply you are installing is AC-powered or a DC-powered.
The installation instructions are different depending upon what type of power is used.
on page 80.
ExtremeSwitching 5520 Series Hardware Installation Guide
on page 74
on page 74
on page 75
on page 78
on page 79
on page 81
on page 74.
on page 75.
on page 78.
on page 79.
on page 81.
Safety
73