Replacing Ac Power Supplies; Replace A 350 W Or 715 W Ac Power Supply - Extreme Networks ExtremeSwitching 5520 Series Hardware Installation Manual

Replacing AC Power Supplies

Replace a 350 W or 715 W AC Power Supply

Replace an 1100 W AC Power Supply
Replace a 2000 W AC Power Supply
This chapter describes how to replace AC power supplies in a switch.
Replace a 350 W or 715 W AC Power Supply
The 350 W AC power supplies with part number 10953 are compatible with 5520-24T, 5520-24X,
5520-48T, and 5520-48SE models.
The 715 W AC power supplies with part number 10951 are compatible with 5520-24W,
5520-12MW-36W, and 5520-48W models.
These switches have two bays for hot-swappable power supplies. In a switch with a redundant power
configuration, you can replace one AC power supply without powering down the switch.
You need the following tools and materials to replace a 350 W or 715 W AC power supply:
•
Thermal protective gloves
•
AC power cord, if you will not be re-using the cord from the removed power supply
To replace a 350 W or 715 W AC power supply, follow these steps:
1. Disconnect the AC power cord from the wall outlet and from the power supply.
2. Note the orientation of the installed power supply, and the location of the latching tab at the right of
the unit.
on page 113
on page 115
on page 118
ExtremeSwitching 5520 Series Hardware Installation Guide 113