Table of Contents
Advertisement
Technical Specifications
2000 W AC Power Supply Technical Specifications
The 2000 W AC power supplies with front-to-back airflow (part nos. XN-
ACPWR-200W-FB and XN-ACPWR-200W-F) are available for use in VSP4900-48P and
VSP4900-12MXU-12XE model switches:
Table 54: Physical Specifications
Dimensions (with handle)
Dimensions (without handle)
Weight
Table 55: Power Specifications
Voltage input range
Nominal input ratings
Maximum inrush current
Output
Power supply input socket and
cord
Power cord wall plug
Efficiency
Table 56: Environmental Specifications
Operating temperature
Storage temperature
Operating humidity
Operational shock
Power Cord Requirements for AC-Powered Switches and AC Power
Supplies
An AC power cord is not included with the AC power supply.
2000 W AC Power Supply Technical Specifications
Height: 1.57 inches (4 cm)
Width: 3.25 inches (8.25 cm)
Length: 11.51 inches (29.25 cm)
Height: 1.57 inches (4 cm)
Width: 3.25 inches (8.25 cm)
Length: 10.25 inches (26.05 cm)
2.95 lb (1.34 kg)
100-200
50 to 60Hz
12.5 A max at 115VAC and 6A max at 230VAC at Full
770 W load
45A at Max 264 VAC at 25C with cold start
54 V, 13.2 A max, 2000 W
IEC/EN 60320-1/C16 AC input receptacles
Refer to
Power Cord Requirements for AC-Powered
Switches and AC Power Supplies
Minimum efficiency: 88% at maximum power output
0°C to 50°C (normal operation)
-40°C to 70°C
93% relative humidity, non-condensing at 30C
VSP 4900 Series Switches: Hardware Installation Guide
on page 87
87
Advertisement
Table of Contents
