X.limit - Mechanical Stroke Range Limit - Burkert 3320 Operating Instructions Manual

Types 3320 and 3321
Basic functions
→
Enter and confirm the lower limit value.
→
Select Closing time.
→
Enter and confirm the upper limit value.
You have enabled and configured the control time limit.
14.2 X.LIMIT – mechanical stroke range limit
This auxiliary function limits the (physical) stroke to defined per cent values (minimum and maximum). The
stroke range of the limited stroke is thereby set to 100%.
If the limited stroke range is left during operation, negative POS values or POS values greater than 100% are
displayed.
Factory setting: Min = 0%,
Limited stroke (%)
(POS)
Image 31: Diagram X.LIMIT
NOTE!
The safety position (closed or open)
is located at the end positions of the physical stroke.
Configuration using the Bürkert Communicator software on PC:
The Bürkert Communicator PC software can be downloaded free of charge from the Bürkert
website.
It requires the USB büS interface set available as an accessory.
Communication is performed via the device's büS service interface.
The setting is made in the detailed view "Parameter for positioner".
How to switch to detailed view:
→
Select Positioner.
You are now in the "Parameter" detailed view.
Max = 100%
Physical stroke (%)
(POS)
Unlimited stroke
Log 0 (0–5 V)
Limited stroke
Log 1 (10–30 V)
English
Set-point value
61