Lift-Assist Backrest Adjustment; Lift-Assist Leg Rest Adjustment - OAKWORKS Clinician Hydraulic User Manual

DIRECTIONS FOR USE

LIFT-ASSIST BACKREST ADJUSTMENT

CAUTION
TO RAISE THE BACKREST:
Raise the back rest by pressing the lever
under the head section and lifting up to
the desired height. It is recommended that
clients take some of their weight off the
back rest while you lift.
TO CHANGE POSITION OF THE BACKREST LEVER:
The backrest lever can be moved to the opposite side of the back rest by removing the
screws and relocating the hand lever to the opposite side of the top into the four pre-drilled
holes.

LIFT-ASSIST LEG REST ADJUSTMENT

TO RAISE THE LEG REST:
Raise the leg rest by pulling the lever on
the side of the leg section and raise to the
desired height. It is recommended that
clients take some of their weight of the leg
rest while you lift.
TO CHANGE POSITION OF THE LEG REST LEVER:
The leg rest lever can be moved to the opposite side of the table. First, remove the screws from
the lever and replace the screws. Move the lever to the opposite side of the table. Remove the
screws that are there and mount the lever.
15
Do not sit on the backrest section.
TO LOWER THE BACK REST:
Press the lever under the head section and
push the back rest down.
TO LOWER THE LEG REST:
Pull the lever on the side of the leg
section and push the leg section down.
Release the lever once the leg rest is at
its desired location and the leg section will
stay in place.