Descriptions Of The Acoustical Settings - Genelec GLM 4 System Operating Manual

Genelec Loudspeaker Manager (GLM) 4 - System Operating Manual

8.2 Descriptions of the Acoustical Settings

Table 2. Acoustical settings
Setting Description
Frequency Click on the monitor/subwoofer in the monitor
response graphs group hive view. Using the right click
(Windows) or Control-Click (Mac) and select
the 'Acoustic Editor' option.
This brings up the frequency response and
all settings for this monitor or subwoofer.
The measured frequency response (red),
room calibration filter (blue), compensated
room frequency response (green) are shown.
Monitor Info Click on the monitor/subwoofer in the monitor
group hive view.
Using the right click (Windows) or Control-
Click (Mac) and select the 'Show Info' option.
Information about the monitor is at the top of
the pop-up window.
Test Controls Click on the monitor/subwoofer in the monitor
group hive view.
Using the right click (Windows) or Control-
Click (Mac) and select the 'Show Info' option.
In the pop-up window, you can set the 'Solo
S' and 'Mute M' controls to solo or mute
individual monitors or subwoofers.
View
page 63 of 87