Frequently Asked Questions; Why Do Id Tones Vary In Different System Configurations; How To Duplicate A Group - Genelec GLM 4 System Operating Manual

Genelec Loudspeaker Manager (GLM) 4 - System Operating Manual

11 Frequently Asked Questions

11.1 Why do ID tones vary in different system configurations?

Different SAM monitors generate different identification tones. The identification tones are listed in
the table below.
Table 6. Identification tones
SAM Systems
82xx Series SAM monitors
83xx Series SAM monitors
72xx Series SAM subwoofers
73xx Series SAM subwoofers
12xx Series SAM monitors

11.2 How to duplicate a Group?

A Group can be duplicated. This is a safe way to manually edit acoustic settings.
Choose the Group you want to duplicate by clicking on the group name. The active group is
highlighted in green colour. To create a duplicate of this group, in the 'Group Preset' menu, choose
'Duplicate'. This creates a full copy of the selected Group including all acoustic settings. The
duplicated group gets a default name. You can change the default name to what you want to have
by selecting the new group, in the 'Group Preset' menu select 'Edit'. To finalize your edit, choose
'Confirm Group' and 'Confirm AutoCal' to exit the edit.
Figure 35. GLM Group tabs.
Used ID tone
Pink noise
Pink noise (SAM system ID tone
was used earlier)
Low frequency sinewave
Low frequency sinewave (SAM
system ID tone was used earlier)
Pink noise
page 79 of 87