Genelec GLM 4 System Operating Manual page 49

Genelec Loudspeaker Manager (GLM) 4 - System Operating Manual page 49 of 87
'Save to Cloud' popups the save dialog window to save the current system setup to Cloud (Must
be logged in to GLM Cloud).
'Import GLM 3 Setup...' popups the open dialog window to import GLM 3 system setup files.
'Exit' closes the GLM application.
Group Preset
The Group Preset menu is used to control settings in group level.
'Add' adds a new group preset to the system setup and opens the Group definition page.
'Duplicate' adds a new group preset to the system setup by copying settings of the currently active
group.
'Edit' opens the Group preset definition page of the currently active group to edit the group
settings.
'Delete' deletes the currently active group preset from the system setup.
'Sound Character Profiler' opens the Sound Character Profiler page to tune the currently active
group preset.
'Standard Loudness SPL Calibration' opens the Standard Loudness SPL Calibration page to
calibrate of the listening level in accordance with digital loudness standards such as ATSC A/85
and EBU R128.
'Set Preset Levels' sets the current level to the selected preset level button. If Standard Loudness
SPL calibration is active, Preset Level 1 is reserved for that.
'Store to Loudspeakers' popups the Store Group settings page that is used to store the acoustic
settings, ISS etc. to all monitors and subwoofers active in the currently active group.
Setup
The Setup menu is used to control settings of the whole system.
'SAM System Power' -menu can be used to power up and shut down SAM system. In default
GLM will send a wake up command, 'Automatically Wake Up System with GLM' menu is checked,
to the GLM network when application is launched and all SAM monitors and subwoofer will be
powered ON. When GLM application is closed SAM monitors and subwoofers will continue to play
audio as default. It's possible to turn OFF whole system when GLM is closed by checking
'Automatically Shut Down System with GLM' menu, selection will send a shut down command to
the GLM network when GLM is closed. These two menu items are stored to each GLM setup.
'Enable USB Controller' Enables Griffin USB Powermate to control level and mute.
'LED State' LED in the monitors and subwoofers can be turned OFF and ON
.
'Edit Layout' enables to edit existing system layout. Used also to replace/remove monitor or
subwoofer from to system.