Monitor Name; Group Status; Analog Input; Digital Input - Genelec GLM 4 System Operating Manual

Loudspeaker manager glm

Hide thumbs Also See for GLM 4:

Table of Contents

Genelec Loudspeaker Manager (GLM) 4 - System Operating Manual



determine if the subwoofer crossover frequency is globally the same for the whole group or

specific to the product (monitor or subwoofer) only

For subwoofers, you can also



set the subwoofer crossover frequency



set the LFE channel gain (0 or +10 dB)

7.14.6.1

Monitor name

Name that helps you identify this monitor.

7.14.6.2

When the setting is ON this monitor belongs to the current group. When the setting is OFF this

monitor is not in the group and will not play audio.

7.14.6.3

When the checkbox is checked this monitor will play analog signal when group is active. This

setting is not active when the input mode is digital.

7.14.6.4

When any of digital channel checkboxes is checked this monitor will play digital signal when group

is active. This setting is not active when the input mode is analog.

For 7350, 7360, 7370 and 7380 subwoofer models there is also option to use 9301 AES/EBU

device. That enables to reproduce digital multichannel content with these models.

page 57 of 87

Table of Contents