Access To Group Preset Settings; Group Name; System Delay - Genelec GLM 4 System Operating Manual

Genelec Loudspeaker Manager (GLM) 4 - System Operating Manual

monitoring level setting for the group (this can be used e.g. as a monitoring level preset for
the group)

system delay (this can delay the whole reproduction system, for example to synchronize
the whole group/audio system with a video presentation)

7.14.1 Access to Group Preset Settings

To access or edit the settings common to a group preset, use the menu command 'Group Preset |
Edit'. This displays an editing window where the group settings and the settings for individual
monitors and subwoofers can be edited. The group settings are shown when you enter the editor.
You will see the monitor and subwoofer settings once you single-click on any of the monitors and
subwoofers in your layout.
Figure 30. Common settings for a SAM group are presented on the left side of the SAM group
definition display.

7.14.2 Group Name

A group name can describe

7.14.3 System Delay

The System delay is applied to all monitors and subwoofer in the group. This can be used e.g. to
synchronize audio with video.
page 55 of 87