Group Settings, Advanced Use - Genelec GLM 4 System Operating Manual

Genelec Loudspeaker Manager (GLM) 4 - System Operating Manual

the bass management filter crossover frequency has changed

when there have been significant structural changes in the room (tables or other furniture
have been moved or there has been structural changes to the walls, ceiling, or floor)

when the listening position has changed

when the locations of items close to the monitors or close to the listening position have
changed

7.14 Group Settings, Advanced Use

A SAM group is the set of monitors and subwoofers reproducing the audio presentation together.
Groups are presented as buttons in the GLM main window. You can start using a group simply by
clicking on the group button. This sends all the settings for this group to all monitors and
subwoofers included in the group.
Figure 29. An example of a GLM system setup having three monitoring groups
***
Each group contains group-specific settings. These settings can optimize the performance of SAM
monitors and subwoofers for different situations and purposes. Settings unique for each group
include

group name

audio signal type, analog or AES/EBU digital

monitors and subwoofers in the group (playing when this group is selected) and the ones
that are not used in this group

the acoustic calibrations that are applied when this group is playing for all monitors and
subwoofers
page 54 of 87