The Steps To Run Autophase - Genelec GLM 4 System Operating Manual

Genelec Loudspeaker Manager (GLM) 4 - System Operating Manual

7.16.2 The steps to run AutoPhase

The steps to run AutoPhase are

before you start, select the Bass Management Filter frequency (see group settings)

select the subwoofer to be AutoPhased by clicking on the subwoofer icon

select the reference monitor by clicking on a monitor icon (the monitor will be highlighted,
and the monitor's LED will flash)

click 'Start Calibration'

wait until the measurement process completes

accept the phase setting by clicking 'Confirm Calibration'
page 61 of 87