Analog Stereo With A Subwoofer; Analog 5.1 Surround - Genelec GLM 4 System Operating Manual

Genelec Loudspeaker Manager (GLM) 4 - System Operating Manual

4.2.3 Analog Stereo with a Subwoofer

Before cabling, turn off the power in all monitors and subwoofers.

connect (Left) audio cable from the source to the subwoofer connector ANALOG IN 1.

connect a cable from subwoofer ANALOG OUT 1 to left monitor ANALOG IN.

connect (Right) audio cable from audio source to subwoofer ANALOG IN 2.

connect (Right) audio cable from Subwoofer ANALOG OUT 2 to right monitor ANALOG IN
Figure 4. Analog stereo cabling with a subwoofer

4.2.4 Analog 5.1 Surround

Before cabling, turn off the power in all monitors and subwoofers.

connect an audio cable from the audio source to the subwoofer ANALOG IN 1

continue from the subwoofer ANALOG OUT 1 to the monitor ANALOG IN

continue connecting all remaining audio input cables to the subwoofer inputs ANALOG IN 2
through to ANALOG IN 5, and from the respective analog outputs to the relevant monitors

finally, connect the LFE channel from the audio source to the subwoofer LFE IN
page 12 of 87