Genelec GLM 4 System Operating Manual page 28

Genelec Loudspeaker Manager (GLM) 4 - System Operating Manual page 28 of 87
Figure 14. Drag and drop the monitor icons onto the layout grid to build a system layout
To place, drag a monitor or subwoofer icon from the stack to the layout grid on the right and drop it
to the position that matches its position in the room. If you know that a certain monitor or
subwoofer is not intended to be a part of the current layout, drag and drop this monitor or
subwoofer to the 'NotUsed' cell.
Continue dragging and dropping until the 'UnPlaced' cell is empty.
Note: monitors and subwoofers are automatically named when you place them, by the location
information. For example, when the monitor is dropped on the left side, it is named as 'Left 8330A'.
If a monitor has AES/EBU digital input it will also be assigned the default AES/EBU subframe to be
reproduced in the digital group, e.g. when the monitor is dropped to the left side, it is assigned to
subframe A.
When you place monitors at symmetrical positions in the grid, the acoustic calibration is done
assuming acoustical symmetry. For example, Left/Right monitor pairs will receive equal room
compensations filter designs when Left and Right monitors are placed symmetrically to the grid
(see Figure 15) and checking the 'Each front Left-Right pair shares the same equalizer settings'
box in the acoustic calibration page.