Test; Transfer - AT&T Definity 8434 User Manual

Test

To test the lights and the
display on your voice
terminal

Transfer

To send present call to
another extension or
outside number
1 While on-hook or off-hook, press and hold [
Green light next to [
•
Note: If the green light next to [
rather than goes on steadily, it means the voice
terminal is not communicating with the PBX. In
such a case, see your system manager.
The lights go on steadily in four groups, and the
•
display fills in all the segments
2 To end test, release [
Lights return to pretest state; green light next to
•
[ ] goes off
Test
Note: If the display or the lights do not respond
during test, notify your system manager.
1 Press [
Transfer
Present call is put on hold and green light next to
•
the held call flutters
You are given a new call appearance
•
2 Dial number that call is to be transferred to
Remain on line and announce call; if no answer or
•
busy, return to held call by pressing its [
3
Press [
Transfer
Call is sent to dialed number
•
4
Hang up
] goes on
Test
]
Test
]
] again
]
Test
] flashes
Test
[dial tone]
[ringback tone]
]
xxxxx
36