Self-Test - AT&T definity 7444 User Manual

To adjust the volume of
the tone ringer on your
telephone (when on-
hook or off-hook on
handset or external
adjunct)

Self-Test

To test the lights,
ringer, and display of
your telephone
If you select any ringing pattern other than the first one,
outside calls will not be differentiated from inside calls.
1 To raise the volume, press the right half of the Volume
control button labeled [
the left half of the Volume control button labeled [
Display shows [ RINGER L >>>> H ] (There are 8
possible volume settings. On the display, 1 arrow is
the lowest setting and 8 arrows is the highest setting)
1 While on-hook or off-hook, press
Green light goes on steadily
2 Press and hold  Drop-Test 
Ringer sounds, all lights go on and display lights up
3
Release  Drop-Test 
Ringer and lights return to pretest state; green light
 -Select 
next to goes off
Note: If ringer or lights do not respond during test,
notify your System Manager.
]; to lower the volume, press
 -Select 
to end test
]
[ ]
26