AT&T Definity 8434 User Manual page 17

The second line on each feature option screen shows the features you can access. To
use any of these features, you must press the softkey below the feature name. For
example, on the feature option screen shown on the previous page, you can leave a
message for another extension to call you back by pressing the softkey below LWC
(the Leave Word Calling feature). If you want to cancel the message, press the
softkey below CnLWC (the Cancel Leave Word Calling feature).
To see the next set of five features, press the display control button labeled [
to move back a screen, press the display control button labeled [
[ ] or [
Next Prev
The following flowchart (Figure 3) shows the default features for the three feature
option screens. These are the 15 softkey features available when the voice terminal
(with display) is shipped from the factory. Also, see "Other Softkey Features That
May Be On Your Display" in this section.
LWC CnLWC Cnslt AutCB Timer
Automatic
Cancel
LWC
Leave
Consult
Word
Calling
Figure 3. The Three Default Feature Option Screens
Notes on the Default Features
An error tone (one beep) sounds when you have made a mistake in your softkey
entries.
Press [ ] at any time to exit Softkey Mode and return to Normal (call-handling)
Exit
Mode.
] until the feature you want to use appears on the second line.
CFrwd CPark Excl TmDay PCall
Callback
Timer
Call
Park
Call
Forwarding
Prog Pause Spress Mark Wait
Time/
Date
Priority
Manual
Calling
Exclusion
Abbreviated
Dialing (AD)
Program
Next
] . Press
Prev
AD
AD
Mark
Pause
AD
Suppress
] ;
AD
Wait
12