Bridging/Manual Exclusion
You can access the Manual Exclusion feature with the softkeys only if the feature's
abbreviation, Excl, appears on the second line of one of the feature option screens.
To answer a bridged call
To use Manual Exclusion
to prevent other bridged
terminals from entering a
call (on a per call basis)
Call Coverage/Consult
You can access the Consult feature with the softkeys only if the feature's
abbreviation, Cnslt, appears on the second line of one of the feature option screens.
To answer a call for a
coworker for whom you
are a coverage point
To leave a message for a
coworker to call the
original caller's extension
1
Press [
] of bridged call
xxxxx
Note: If your terminal has Ringing Appearance
Preference, this step is not necessary; you will
automatically be connected to the call when you lift
the handset.
2
Pick up handset or press [
1 Press [
] and then press the softkey below Excl
Menu
while active on a call
or, if Excl is not available on your display,
press [
Excl xxxxx
Note: Pressing the softkey below Excl or pressing
[
] again reactivates bridging.
Excl xxxxx
1
Press [
] of incoming call when ringing begins
xxxxx
or green light flashes
Note: The call is not at your terminal until the
green light is flashing.
1 Press [
Cvr CallBk
Note: To leave a message for a coworker to call you,
press [
] instead.
LWC
]
Speaker
] while connected to the call
] while connected to the call
[confirmation tone]
20