To place a call using an
AD list button or code
5
Dial list item (1, 2, 3... )
Dial number you want to store (up to 24 digits)
6
Note: You may also be able to use the softkeys to
add special functions such as Pause, Mark, Suppress,
or Wait into the programmed telephone numbers.
If you are programming an outside number, be sure
to include a trunk code, if applicable.
Press [
]
7
#
Number is stored
•
Repeat Steps 5 through 7 if you want to program
•
additional items on the same list; press [
and begin again at Step 1 if you want to program
items on another list.
8
Hang up or press [
Note: Record your personal list items on the
Abbreviated Dialing list in the back of this guide;
group, system, and enhanced lists can be obtained
from your system manager.
Press [
1
Pers List
or Dial appropriate AD List code:
List 1
•
List 2
•
List 3
•
Note: An [
Enhcd List
system manager.
2 Dial desired list item (1, 2, 3...)
•
Call is automatically dialed
] to end programming
Drop
] or [
] or [
Grp List
] may also be available; see your
[dial tone]
[confirmation tone]
]
Drop
]
Sys List
[ dial tone ]
[ringback tone]
18