Avaya 6424D+M User Manual page 49

Attendant Direct Extension Selection (DXS) With Busy Lamp Field (BLF)
Allows you to extend calls to voice terminal users by pressing a hundreds group select
button and a tens and units (DXS) button. See Figure 2-6 for the location of these buttons on
the console.
To answer and extend an incoming call using attendant DXS with BLF:
1. Press
[ANSWER]
Audible ring stops. ATND light goes on. PA light goes off.
2. Press group select button for the requested hundreds group (first two digits of the
extension number).
Group select light goes on.
3. Check the BLF to see if the telephone/voice terminal is idle (associated light is off).
4. Press the DXS button for the tens and units digits (second two digits of the extension
number).
Listen for ringback tone. SPLIT, BLF, and RING lights go on. ANS light goes on, and
RING light goes off when called party answers.
5. Press
[RELEASE]
ATND, ANS, and SPLIT lights go off. On BLF, associated light stays on for the
duration of the call.
Extended DXS
Allows you to extend calls to voice terminal users when the system has more than 1800
hundreds pairs (1800 lines). Even though the hundreds group select buttons are inactive on
your console, this feature gives you the capability of extending calls by using the hundreds
group select (SELCT) and display (DISP) buttons and the DXS button.
To answer and extend an incoming call to a voice terminal using extended DXS:
1. Press
[ANSWER]
Audible ring stops. ATND light goes on. SELCT light lights. PA light goes off.
.
.
.
CHAPTER 4. OPERATING FEATURES
4-27