Set Console Initcmd - Avaya Cajun P550R Cli Reference Manual

set console initcmd

Command Mode
Description
Syntax
To Enable:
Name
[init_cmd_string]
Sample Output
Systems
Cajun P550R/P880/P882 Command Reference Guide
Configuration
Sets the modem initialization string for console serial port modem
control software. The default Modem Configuration String is
AT&D0S0=1.
* Note: This command is not applicable when the console serial
port is configured in TTY mode. The input will not be
accepted or stored when the serial port is configured in
TTY mode.
The init command string is used to configure the
attached external modem so that dial-in sessions will be
properly accepted by the modem and the connection
successfully completed between the Cajun and the
remote system. The set console initcmd is only accepted
when the console serial port is configured as PPP mode.
Please read your modem's reference literature to find the
correct AT parameters.
There are few configurations and Avaya recommended
modems that do not require a modem initialization
string.
set console initcmd [init_cmd_string]
Table 5-4. Parameters, Keywords, Arguments
Definition
An optional parameter, however, when the parameter is
missing, it means that the modem initialization string is <null>.
The following example sets the console
Cajun(configure)# set console initcmd AT&D0S0=1
P550/P550R/P880/P882
Console
5-5