filter|allow
filter-hops
Sample Output
Systems
Cajun P550R/P880/P882 Command Reference Guide
The action to take for the IPX service.
• filter - Do not add the service to the service table (inbound
SAP packets) or do not advertise the service (outbound SAP
packets).
• allow - Add the service to the service table (inbound SAP
packets) or advertise the service (outbound SAP packets).
The number of hops to get to the service in the service table
(inbound SAP packets) or in the advertised information (outbound
SAP packets). The range is 0 to 16 hops.
The following example:
sets the precedence to 2
sets the filter-name to netbios
sets the service type to 1
applies filters to SAP packets in both directions (both)
adds the service to the service table (allow)
sets the filter hops to 4
on interface serial 0.
Cajun(config-if:serial0)# ipx sap-name-filter
2 netbios 1 both allow 4
P550/P550R/P880/P882
IPX
11-27