Chapter 18
Name
area-id
18-6
area nssa
Command Mode: Router-OSPF
Description
Configure an area as a Not So Stubby Area (NSSA). To remove the
NSSA distinction from the area, use the no form of this command.
Command Syntax
To Enable:
area <area-id> nssa
To Disable:
[no] area <area-id> nssa
Table 18-4. Parameters, Keywords, Arguments
Definition
A decimal value or IP address that identifies an OSPF area.
Use no area <area-id> to remove an area from the
software configuration.
Sample Output
Cajun45(configure router:ospf)# area 2.0.0.0
nssa
Cajun45(configure router:ospf)# no area
2.0.0.0 nssa
Cajun P550R/P880/P882 Command Reference Guide