Chapter 11
ipx sap-max-packetsize
Command Mode
Description
Syntax
To Enable:
To Disable:
Sample Output
Systems
11-24
Interface
Sets the maximum packet size of SAP updates sent out the interface.
The no form of this command disables this function. The default
state is disabled.
* Note: On a Cisco system, this command takes packetsize. On
the Cajun system, it is a Boolean.
ipx sap-max-packetsize
[no] ipx sap-max-packetsize
The following example sets the SAP updates received by interface
serial 0 to the maximum packet size.
Cajun(config-if:serial0)# ipx sap-max-packetsize
P550/P550R/P880/P882
Cajun P550R/P880/P882 Command Reference Guide