Set Vlan (Frame Format) - Avaya Cajun P550R Cli Reference Manual

Chapter 29

set vlan (frame format)

Command Mode
Description
Guidelines
Syntax
To Enable:
Name
vlan-id
vlan-name
29-6
Configuration
This command modifies the frame tagging format of the switch
port(s) bound to the specified VLAN.
There are two forms of the command.
set vlan <vlan-id> ...: Modifies the frame format for the
—
specified switch port(s) on the VLAN specified by <vlan-
id>.
set vlan name <vlan-name> ...: Modifies the frame
—
format for the specified switch port(s) on the VLAN
specified by <vlan-name>.
The switch port argument(s) take any number of switch port
specifications separated by either commas or whitespace. The two
different switch port specifications are shown below.
individual switch port: <mod-num>/<port-num>
switch port range: <mod-num>/<port-num>-<port-num>
set vlan {<vlan-id> | name <vlan-name>} <mod-swport-
range>[...,<mod-swport-range>] frame-format {clear | from-port}
Table 29-3. Parameters, Keywords, Arguments
Definition
Specifies the VLAN the switch port is bound to by its VLAN ID.
Specifies the VLAN the switch port is bound to by its name.
Cajun P550R/P880/P882 Command Reference Guide