Appletalk Cable-Range - Avaya Cajun P550R Cli Reference Manual

appletalk cable-range

Command Mode
Description
Syntax
To Enable:
To Disable:
Name
cable-range
network.node
Sample Output
Systems
Cajun P550R/P880/P882 Command Reference Guide
Interface
Configure a cable range for an Appletalk Phase II for an
interface. The no form of this command disables Appletalk
for this interface.
appletalk cable-range <cable-range>[<network.node>]
[no] appletalk cable-range
Table 3-5. Parameters, Keywords, Arguments
Definition
An optional parameter to indicate the range of the
Appletalk network values to be used on this interface.
Specify start and end values between 0 and 65279 and
separate the values with a hyphen.
The starting network number must be less than the
ending network number. When cable-range is omitted, the
interface tries to configure the Appletalk network and
obtains its configuration from another Appletalk router.
The AppleTalk network address to assign to the interface.
When network.node is omitted, the Appletalk address
defaults to 0.0.
• network - A 16-bit network number between 0
and 66279.
• node - An 8-bit node number between 0 and 254.
The following example configures a cable range of 222-224 for the
appletalk interface on serial port 0.
Cajun(config-if:serial0)# appletalk cable-range
222.244
P550/P550R/P880/P882
Appletalk
2-7