boot system flash
Command Mode
Description
Syntax
To Enable:
Name
app1|app2
cardapp1|cardapp2
Sample Output
Systems
Cajun P550R/P880/P882 Switch Command Reference
Configuration
Specifies which system image the router loads at startup. Configures
the image to boot from the eprom.
The "no" form of this command restores the default system flash
setting (app1).
boot system flash {app1|app2|cardapp1|cardapp2}
Table 26-1. Parameters, Keywords, Arguments
Definition
Choose app1 or app2.
Choose FLAS cardapp1 or cardapp2.
The following example specifies the system image that the router
loads at startup to FLASH cardapp2 on the pcmcia.
Cajun(configure)# boot system flash cardapp2
Boot flag set to 'cardapp2'.
P550/P550R/P880/P882
(80-Series Supervisor only)
System
26-3