Chapter 10
output-delay
Command Mode
Description
Syntax
To Enable:
To Disable:
Name
delay
Sample Output
Systems
10-12
IP-RIP
Specifies the interpacket delay for RIP updates. The no form of this
command removes a delay definition. The default delay time is 0
milliseconds (no delay).
output-delay <delay>
[no] output-delay
Table 10-10. Parameters, Keywords, Arguments
Definition
The delay between packets in a multiple-packet RIP
update. The range is 8 to 50 milliseconds.
The following example sets the interpacket delay for RIP updates to
10 seconds.
Cajun(configure router:rip)# output-delay 10
P550/P550R/P880/P882
Cajun P550R/P880/P882 Command Reference Guide