Set Spantree Maxage - Avaya Cajun P550R Cli Reference Manual

To Enable:
Name
maxage-value
802.1D
vlan-id
vlan-name
Cajun P550R/P880/P882 Command Reference Guide

set spantree maxage

Command Mode:
Description
Sets the maximum message age for a bridge. The default age time is
20 seconds.
Command Syntax
set spantree maxage <maxage-value> {802.1D|vlan {<vlan_id> name
<vlan-name}}
Table 23-6. Parameters, Keywords, Arguments
Definition
The maximum age value for the bridge, in seconds.
Configure the IEEE 802.1D Legacy Bridge.
Note:
Configure a per-vlan or dual-layer bridge by using
the VLAN's vlan ID.
Note:
Configure a per-vlan or dual-layer bridge by using
the VLAN's name.
Note:
Sample Output
This example sets the spanning tree maximum age to 25
seconds.
Cajun(configure)# set spantree maxage 25
802.1D
Bridge MaxAge Successfully set to 25
The 802.1D bridge can only be modified when in
ieee config mode.
LAN bridges can only be modified when in per-
vlan or dual-layer mode.
VLAN bridges can only be modified when in per-
vlan or dual-layer mode.
STAP
23-7