Chapter 20
To Enable:
To Disable:
Name
type
number
20-62
transmit-interface
Command Mode: Interface
Description
Assign a transmit interface to a receive-only interface. To return to
normal duplex ethernet interfaces, use the no form of this
command. The default state is disabled.
Command Syntax
transmit-interface <type> <number>
[no] transmit-interface <type> <number>
Table 20-34. Parameters, Keywords, Arguments
Definition
Transmit the interface type to be linked with the
(current) receive-only interface.
Transmit the interface number to be linked with the
(current) receive-only interface.
Cajun P550R/P880/P882 Command Reference Guide