Ipx Service - Avaya Cajun P550R Cli Reference Manual

Chapter 11

ipx service

Command Mode
Description
To Enable:
To Disable:
Name
service-type
service-name
network, node
socket
network.next-hop-node
hops
11-32
Configure
Specifies static SAP entries. To remove static SAP entries, use the no
form of this command. The default is that no static services are
defined.
Command Syntax
ipx service <service-type> <service-name> <network> <node>
<socket> <network.next-hop-node> <hops>
[no] ipx service <service-type> <service-name> <network> <node>
<socket> <network.next-hop-node> <hops>
Table 11-15. Parameters, Keywords, Arguments
Definition
The number of the type of the service. The range is 0-FFFF.
Name of the server that provides the service. The range is 1 to
47 bytes long.
Network number and node address of the server.
• The argument network is an eight-digit hexadecimal
number that uniquely identifies a network cable segment.
It can be a number in the range 1 to FFFFFFFD. You do
not need to specify leading zeros in the network number.
For example, for the network number 000000AA you can
enter AA.
• The argument node is the node number of the target
Novell server. This is a 48-bit value represented by a MAC
address (aa:bb:cc:dd:ee:ff).
The socket number for this service. The range is 0 - FFFF
Network number and node address of the next hop to the
server.
<next-hop-node> - The argument node is the node number of
the target Novell server. This is a 48-bit value represented by a
MAC address (aa:bb:cc:dd:ee:ff).
Number of hops to the server. The range is 1-16.
Cajun P550R/P880/P882 Command Reference Guide