Installing A Slimline Optical Drive; Removing A Slimline Optical Drive; Figure 48. Installing The Plastic Guide To The Optical Drive; Figure 49. Installing An Optical Drive - Intel R1000EP Series Service Manual

Installing a Slimline Optical Drive

1. Install the plastic guide onto the back of the drive and attach with two screws as shown (see
letter A).
2. Insert the optical drive into chassis opening and push all the way until it stops (see letter B).
3. Connect the cables as shown (see letter C).

Removing a Slimline Optical Drive

1. Remove the cables (see letter A).
2. Lift up the blue tab to release the optical drive (see letter B).
3. Slide the optical drive out (see letter C).
®
Intel Server System R1000EP Service Guide

Figure 48. Installing the Plastic Guide to the Optical Drive

Figure 49. Installing an Optical Drive

Server System Features
31