Life Fitness Club+ Series Owner's Manual page 39

Problem Probable Cause
User is pushing
striding belt. This
occurs when the
runner is running faster
than the striding belt
will travel, with the
result of the striding
belt being pushed with
the runner's feet.
User is stalling striding
belt. This will occur
with heavier users at
lower striding belt
Maximum treadmill
speeds. The striding
speed is reduced.
belt will "stall" if the
user is traveling slower
than the striding belt
speed.
Striding belt/deck
malfunctions. The deck
laminate is worn
through or the
underside of striding
belt is glazed over
(hard, glossy).
Power source is
insufficient.
Rubbing sound comes Foreign objects may
from underneath be stuck underneath
treadmill. the machine.
Display does not
Loose connection at
illuminate when
display console or
machine is powered
motor control board.
on.
Possible Solutions
Instruct users not to push striding belt in either direction.
Replace belt and deck. Contact Customer Support Services.
Power source is insufficient.
Inspect underneath striding belt and machine. Remove any debris or
objects that may cause interference with the treadmill.
Check all electrical connections for proper attachment. Contact
Customer Support Services.
Page 39 of 44