Start Job - 3D Systems DMP Flex 350 User Manual

5.4 Start Job
1. In DMP Control, click on Job analyser.
2. Click on Single Layer (1) and Power Burn (2).
3. Click on Start Job (3).
4. The printer will scan the first layer to the plate, make sure
all the parts are on the build plate.
5. In DMP Deposition, open the Manual tab and use the
controls to lower the build plate 20μm and use the coater
to deposit a new powder layer over the build plate (4).
6. Make sure Single Layer and PowerBurn (5) are no longer
on. You can now start the job from layer 1 and the printer
will start with the direct metal printing process.
3D Systems, Inc. 68
2
3
11
4
5
p/n: 15-D100, rev. D
1