Feed Mechanism - Brother BAS-311H Service Manual

7. ASSEMBLY

7-6. Feed mechanism

Apply grease <Grease unit (SB1275-101)> specified by Brother to the portions indicated by the white arrows.
While pushing in the direction of the
arrow, tighten the set screws (8).
3270B
Apply adhesive (Threebond 1324N or
similar) to the outer bearing surface of
the ball bearing (1).
67
Apply adhesive (Threebond 1324N or
similar) to the outer bearing surface of
the ball bearing (1).
BAS-311H
While
direction of the arrow,
tighten the set screws (8).
Apply adhesive (Threebond
1324N or similar) to the outer
bearing surface of the ball
bearing (2).
1. Ball bearings [2 pcs.]
2. Ball bearing
3. Timing belt
4. Timing pulley
5. X-pulley driving shaft
6. Retaining ring C
7. X-feed gear
8. Set screws [6 pcs.]
pushing in the